The International Conference on Applied Mechanics and Mechanical Engineering

Author Index

A

A., Ali A. THE MECHANICAL BEHAVIOUR OF RECYCLED HIGH DENSITY POLYETHYLENE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 35-50]
A., Al-Maqtri M. Shock absorber characteristics representations and vehicle performance evaluation [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 369-382]
A., Assar A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
A., El-Butch SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
A., El-Haddad M. SIDE-STICK CONTROL OF POWER RACK AND PINION STEERING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 383-396]
A., Elhakim M. OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
A., Elhemly M. IMPROVEMENT OF TRACTOR SEMITRAILER STABILITY DURING SEVERE MANEUVER AT HIGH SPEED [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 659-679]
A., El Tantawie, M. ELIMINATION OF UNBALANCE IN MAGNETIC BEARING SYSTEMS WITH NEURO-FUZZY REDUCED ORDER OBSERVER [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 573-587]
A., Fayed M. IMPROVEMENT OF TRACTOR SEMITRAILER STABILITY DURING SEVERE MANEUVER AT HIGH SPEED [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 659-679]
A., Hegazy S. Shock absorber characteristics representations and vehicle performance evaluation [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 369-382]
A., ISKANDER B. THE QUALITY OF AL-SI CASTING OF L SECTION USING WILLIAM′S CORE AND ELLIPTICAL AND SPHERICAL RISERS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 51-68]
A., Mahmoud N. EFFECT OF PIPE INCLINATION AND ADDING FINES ON SLURRY TRANSPORT OF COARSE PARTICLES. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 298-314]
A., Omer A. DESIGN AND MANUFACTURING OF NEW UNWEIGHING SYSTEM. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 421-431]
A., Risha H. A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
A., Shahin M. RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
A., Shahin M. SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
A., Shahin M. DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
A., Sherif H. CRACK DETECTION IN BARS WITH LONGITUDINAL CRACK USING VIBRATION MEASURING TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 697-717]
A., Showaib E. EXPLORATORY STUDY OF THE BEHAVIOR OF SOME LOCAL AGRICULTURAL RESIDUAL MATERIALS TO BE USED FOR REINFORCING CONSTRUCTION MATERIALS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 92-111]
A., Wahba W. OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
Abdelkader, M. S. BALLISTIC RESISTANCE OF FLEXIBLE COMPOSITE AND TEXTILE TARGETS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 490-509]
Abdel-Moneim, S. A. HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
ABDOU, S. E. INVESTIGATION OF STATIC AND DYNAMIC BEHAVIOUR OF PREESURE COMPENSATED VARIABLE DISPLACEMENT SWASH PLATE AXAL PISTON PUMP [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 315-333]
Afify, R. I. HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
AWAD, MOHAMMED A. DETERMINATION OF MACHINING PROCESS FOR ROTATIONAL PARTS USING NEURAL NETWORKS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 239-251]

B

B., Ahmad. S. NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
B., AMGAD M. AN IMPROVEMENT OF LONGITUDINAL FLYING QUALITY OF HSCT AEROELASTIC AIRCRAFT MODEL USING GPC TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 128-143]
B., Badawi A. RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
B., Badawi A. SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
B., Badawi A. DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
B., BHAT R. CONDITION MONITORING AND CONTROL OF ROLLING MILLS USING ELECTRO-HYDRAULIC SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 178-201]

E

E., ABDELHADY M. AN IMPROVEMENT OF LONGITUDINAL FLYING QUALITY OF HSCT AEROELASTIC AIRCRAFT MODEL USING GPC TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 128-143]
E., DEPING LI M. CONDITION MONITORING AND CONTROL OF ROLLING MILLS USING ELECTRO-HYDRAULIC SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 178-201]
E., El-Soaly E. WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
E., EL Soaly, E. ELIMINATION OF UNBALANCE IN MAGNETIC BEARING SYSTEMS WITH NEURO-FUZZY REDUCED ORDER OBSERVER [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 573-587]
E., GAMAL M. AN IMPROVEMENT OF LONGITUDINAL FLYING QUALITY OF HSCT AEROELASTIC AIRCRAFT MODEL USING GPC TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 128-143]
E., Mokhtar M. METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
E., Rabieh SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
E., Tarek. H. NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
El Adl, S. M., Rabeih EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
Elawad, E. BALLISTIC RESISTANCE OF FLEXIBLE COMPOSITE AND TEXTILE TARGETS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 490-509]
Elmaihy, A. RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
Elmaihy, A. SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
Elmaihy, A. DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
EL-SENBAWI, M. Allam DYNAMIC BEHAVIOR OF CONTROL VALVES OF A LIQUID ROCKET ENGINE FEEDING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 467-489]
El-shamy, A. R. HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]

F

F., HASSAN M. STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
F., YOSSEF A.M. THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
F., Younes M. AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
Fayed, A. BALLISTIC RESISTANCE OF FLEXIBLE COMPOSITE AND TEXTILE TARGETS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 490-509]

G

G., Raafat. M. NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
Girgis, N. DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]

H

H., BAKER M. THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
H., Daken M. WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
H., Ebraheem M. SIDE-STICK CONTROL OF POWER RACK AND PINION STEERING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 383-396]
H., El-Dannanh E. AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
H., Hossamel-deen Y. Shock absorber characteristics representations and vehicle performance evaluation [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 369-382]
H., LOTFY A. THEORETICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC BEHAVIOR OF AN ELECTRO-HYDRAULIC DIRECTIONAL PROPORTIONAL VALVE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 165-177]

I

I., EL SEAIDY M. FINE GRAINED 6061 ALUMINUM ALLOY SHEETS PRODUCED BY ACCUMULATIVE ROLL- BOUNDING (ARB) PROCESS. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 22-34]
I., Elshaer Y. DESIGN AND MANUFACTURING OF NEW UNWEIGHING SYSTEM. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 421-431]
I., Mohamed K. RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
I., Mohamed K. SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
I., Mohamed K. DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
Ibrahim, E. A. DESIGN OF AN EXPLOSIVELY FORMED PENETRATOR CAPABLE OF DEFEATING A SPECIFIC METALLIC TARGET [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 446-466]
Ismail, M. M. DESIGN OF AN EXPLOSIVELY FORMED PENETRATOR CAPABLE OF DEFEATING A SPECIFIC METALLIC TARGET [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 446-466]

K

K., Ahmed A. METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
K., KHALIL M. CONDITION MONITORING AND CONTROL OF ROLLING MILLS USING ELECTRO-HYDRAULIC SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 178-201]
K., Younes Y. EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
K., Younes Y. AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]

M

M., Abd Elkhalek Sh. OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
M., Bayoumy A. INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
M., Bennaya CRACK DETECTION IN BARS WITH LONGITUDINAL CRACK USING VIBRATION MEASURING TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 697-717]
M., El Demerdash S. EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
M., Elhady A. ACTIVE CONTROL EFFECT ON REDUCING NOISE AND RESONCE AMPLITUDE OF CLAMPED PLATE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 718-724]
M., Elhady A. DYNAMIC IMPACT PROBLEMS: MODELING AND ANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 679-696]
M., El kafafy SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
M., El-Maddah AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
M., ELNAGGAR W. STUDYING THE PARAMETERS INFLUENCING THE ACCURACY OF ELECTRON BEAM DERILLED HOLES [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 202-213]
M., Elshabka A. INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
M., El-Wahab M. WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
M., GHONEIM M. FINE GRAINED 6061 ALUMINUM ALLOY SHEETS PRODUCED BY ACCUMULATIVE ROLL- BOUNDING (ARB) PROCESS. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 22-34]
M., Ibrahim I. INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]
M., Ibrahim AN EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC DAMPING DUE TO BAFFLE ARRANGEMENTS IN A RECTANGULAR TANK [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 607-623]
M., IBRAHIM M. FINE GRAINED 6061 ALUMINUM ALLOY SHEETS PRODUCED BY ACCUMULATIVE ROLL- BOUNDING (ARB) PROCESS. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 22-34]
M., IBRAHIM THE QUALITY OF AL-SI CASTING OF L SECTION USING WILLIAM′S CORE AND ELLIPTICAL AND SPHERICAL RISERS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 51-68]
M., KHOAIL A. THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
M., KOHAIL A. STUDYING THE PARAMETERS INFLUENCING THE ACCURACY OF ELECTRON BEAM DERILLED HOLES [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 202-213]
M., KUFFOVA FATIGUE RESISTANCE OF MAGNESIUM ALLOY AZ 91D AT HIGH-FREQUENCY CYCLE LOADING. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 15-21]
M., Mahgoub H. CRACK DETECTION IN BARS WITH LONGITUDINAL CRACK USING VIBRATION MEASURING TECHNIQUE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 697-717]
M., MASOUD M. STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
M., MENSHAWY T. THEORETICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC BEHAVIOR OF AN ELECTRO-HYDRAULIC DIRECTIONAL PROPORTIONAL VALVE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 165-177]
M., Metwally M. METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
M., Mohamed A. METHODOLOGY OF OBTAINING STRUCTURAL MODEL OVER A MONOCOQUE CLOSED INTEGRAL SEDAN CAR BODY STRUCTURE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 432-445]
M., MOHIE THE QUALITY OF AL-SI CASTING OF L SECTION USING WILLIAM′S CORE AND ELLIPTICAL AND SPHERICAL RISERS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 51-68]
M., MOUGHITH W. THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 229-238]
M., OSMAN M. STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
M., RASHAD M. STUDY OF THE MECHANICAL AND METALLOGRAPHIC PROPERTIES OF CARBON-ALUMINA COATED IRON PRODUCED BY IMPULSE PLASMA DEPOSITION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 81-91]
M., Salem A. Evaluation of tracked vehicle performance characteristics [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 397-409]
M., Sharkawi A. EXPLORATORY STUDY OF THE BEHAVIOR OF SOME LOCAL AGRICULTURAL RESIDUAL MATERIALS TO BE USED FOR REINFORCING CONSTRUCTION MATERIALS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 92-111]
M., Tawfic T. AN INVESTIGATION OF THE INSERTIONMECHANISM INFLUENCE ON THE OVERALL BEHAVIOR OF THE THREE-DIMENSIONAL AEROSPACE COMPONENTS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 1-8]
MAALAWI, KARAM Y. TORSIONAL DYNAMIC OPTIMIZATION OF WIND POWER GENERATORS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 625-642]
MAHMOUD, Tamer N. DYNAMIC BEHAVIOR OF CONTROL VALVES OF A LIQUID ROCKET ENGINE FEEDING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 467-489]
Metwally, M. DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]

O

O., Mohamed T. INVESTIGATION OF LATERAL FLYING QUALITIES OF AIRCRAFT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 540-558]

R

R., Ghazy M. ACTIVE CONTROL EFFECT ON REDUCING NOISE AND RESONCE AMPLITUDE OF CLAMPED PLATE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 718-724]
R., Gomaa F. Fault monitoring in complex dynamic system by utilization statistical analysis technique [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 643-658]
R., Ramadan M. A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
Rabie, G. DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]
RABIE, M. Galal INVESTIGATION OF STATIC AND DYNAMIC BEHAVIOUR OF PREESURE COMPENSATED VARIABLE DISPLACEMENT SWASH PLATE AXAL PISTON PUMP [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 315-333]
RABIE, M. Galal DYNAMIC BEHAVIOR OF CONTROL VALVES OF A LIQUID ROCKET ENGINE FEEDING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 467-489]
Refaey, H. A. HEAT TRANSFER ENHANCEMENT IN PIPE FLOW WITH DOWNSTREAM PULSATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 352-368]
Riad, A. M. DESIGN OF AN EXPLOSIVELY FORMED PENETRATOR CAPABLE OF DEFEATING A SPECIFIC METALLIC TARGET [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 446-466]

S

S., Abo El-Khair M. THE MECHANICAL BEHAVIOUR OF RECYCLED HIGH DENSITY POLYETHYLENE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 35-50]
S., Ahmad. M. NATURAL FREQUENCIES OF THIN COMPOSITE PLATES SUBJECTED TO STATIC LOADS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 559-572]
S., EL-AGAMY M. DETERMINATION OF MACHINING PROCESS FOR ROTATIONAL PARTS USING NEURAL NETWORKS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 239-251]
S., El-Demerdash SMART FLUID DAMPER MODELS APPLIED TO VEHICLES VIBRATION CONTROL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 588-606]
S., El-Kader M. WINDING ANGLE EFFECT ON FRATURE BEHAVIOUR OF COMPOSITE TUBES UNDER DIFFERENT LOADING CONDITIONS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 69-80]
S., Fangary Y. EFFECT OF PIPE INCLINATION AND ADDING FINES ON SLURRY TRANSPORT OF COARSE PARTICLES. [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 298-314]
S., Hani S. EVALUATION OF LOCAL HUMPS AND A NEW HUMP DESIGN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 526-539]
S., Hassan, S. ELIMINATION OF UNBALANCE IN MAGNETIC BEARING SYSTEMS WITH NEURO-FUZZY REDUCED ORDER OBSERVER [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 573-587]
S., Mohamed M.A. DESIGN ALTERNATIVES FOR A MULTI-STANDARD MACHINE [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 410-420]
S., Mohamed M.A. A SAFETY PLAN FOR AN INDUSTRIAL PLANT [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 252-263]
S., MOHAMED M.A. A CRACK PATH-BASED MODEL TO ASSESS MICROSTRUCTURE INCLUSIONS RANDOMNESS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 1-14]
S., MOHAMED M.A. MECHANICAL CRITERIA FOR REPORTS TO OPTIMALLY JUMP AND RUN [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 144-164]
S., Moughith W. OPTIMIZATION OF IDLE PATH IN DRILLING ON CNC MACHINING CENTRE USING THE GA [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 214-228]
S., MOUGHITH W. STUDYING THE PARAMETERS INFLUENCING THE ACCURACY OF ELECTRON BEAM DERILLED HOLES [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 202-213]
S., Samy A. RECONSTRUCTION OF DIESEL EGINE CYLINDER PRESSURE USING VIBRATION AND ACOUSTIC EMISSION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 510-525]
S., Samy A. SEPARATION AND IDENTIFICATION OF SIMULATED DIESEL ENGINE NOISE USING INDEPENDENT COMPONENTANALYSIS AND TIME-FREQUENCYANALYSIS [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 264-281]
S., Samy A. DIESEL ENGINE MISFIRE DETECTION UTILIZING TIME-FREQUENCY ANALYSIS OF MEASURED ENGINE VIBRATION [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 282-297]
Saleh, I. DYNAMIC PERFORMANCE OF AN ELECTROHYDRAULIC SERVO ACTUATOR WITH CONTACTLESS CONTROLLED SPOOL [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 334-351]
SALEH, Tamer A. INVESTIGATION OF STATIC AND DYNAMIC BEHAVIOUR OF PREESURE COMPENSATED VARIABLE DISPLACEMENT SWASH PLATE AXAL PISTON PUMP [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 315-333]
Sh., Asfoor M. SIDE-STICK CONTROL OF POWER RACK AND PINION STEERING SYSTEM [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 383-396]

W

W., Galal Evaluation of tracked vehicle performance characteristics [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 397-409]

Y

Y., Zeyada IMPROVEMENT OF TRACTOR SEMITRAILER STABILITY DURING SEVERE MANEUVER AT HIGH SPEED [Volume 12, 12th International Conference on Applied Mechanics and Mechanical Engineering., 2006, Pages 659-679]